WaterSafe WS-425B City Water Test Kit WaterSafe WS-425B

WaterSafe City Water Test Kit WS 425B. Comprehensive at-home water test that checks for Bacteria, Lead, Pesticides, Nitrates, Nitrites, Chlorine, pH, and water hardness. Test for 1 water source. City Drinking Water Test Desired Values: EPA maximum contaminant levels or guideline standards * Bacteria: None * Lead: Below 15 ppb * Pesticides: Below 3ppb (atrazine), Below 4ppb (simazine) * Nitrite: Below 1.0 ppm * Total Nitrate/Nitrite: Below 10.0 ppm * Total Chlorine: Below 4 ppm * pH 6.5 to 8.5 * Total Hardness: 100 ppm or less (water is drinkable up to 500 ppm) Before you begin... 1. Keep tests out of reach of children and pets. Do not ingest anything from this test kit. Do not drink water sample used for testing. Store and use at room temperature (60-86 F) 2. Do not open packets or a vial until you are ready to perform the tests. 3. Do not use on hot water or water containing bleach detergents. 4. Do not re-use any part of the test kit. 5. Read and follow all instructions carefully. WaterSafe City Drinking Water Test Kits are using breakthrough technology for accurate at-home water testing. They are fast, economical, and provide lab quality results in minutes (except bacteria test). With WaterSafe WS425B All-in-one Drinking Water Test Kit, you can learn a lot about your tap water: find if you have hard water, detect high amounts of chlorine, check if lead levels are unusually high, see if your water is acidic, alkaline or balanced via pH test.

Click here to buy now - $19.95